Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

3.2.15 Positioning and moving the cursor

Having entered the measurement mode, a white vertical cursor appears automatically, indicating the

position on which the measurements are being carried out.

In order to move the cursor along the acquisition, it is possible to use the following methods:

• Click on any point of the graphs.

• Click on any point of the graphs and hold down the left-hand mouse button to drag the cursor to the left

and to the right.

• Use the left and right arrows on the keyboard.

• Hold down CTRL and use the left and right arrows on the keyboard to move the cursor more quickly.

3.2.15.1 Cursor values (values table)

Entering in measurement mode, a table displaying the values of the graphs in the intersection position with

the cursor appears on the right-hand side of the screen.

The first elements displayed indicate the value of the X axis (time and distance) which is being referred to for

reading the values of the channels represented in the graphs. Under this, the boxes with the names and

values of the channels are displayed, each with its own colour (in order to set the channel colour, see

chapter 3.2.9 of this manual) and with the value assumed at the point where the position cursor is situated.

POSITION CURSOR