Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

When the function is not activated, all the trajectories of the loaded session are superimposed on each other.

In order to display the difference between the laps correctly, it may be necessary to zoom in on the course

window.

3.2.16.9 Zoom on the course window

In order to display an enlargement of a specific part of the course, it is possible to enter in measurement

mode (see point 6.7.2) and position the cursor near the point of the course which is to be zoomed in on. It is

then possible to use the Zoom in and Zoom out buttons on the main toolbar to enlarge or reduce the

display of the track inside the window.

These zoom functions are particularly advisable during visualization in trajectory analysis mode, when it is

necessary to identify the differences between the trajectories of the laps added to the project.

TRACK BAR

WITH

TRAJECTORY

COMPARISON

BETWEEN 2

LAPS

LAP 1 TRAJECTORY

LAP 2 TRAJECTORY