Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

3.2.17 Track library

The track library contains the list of all the courses available. When it is accessed the user can operate on

these courses, setting the finish lines and the points where the split times are measured, dividing the path

into segments and selecting the course to apply to the session in use.

In order to display the Track Library Management window, simply click on the corresponding button on the

left-hand navigation bar.

The left-hand side of the Track Library Management window shows a graphic representation of the course,

with the finish line, split points and segments (if set). See the following paragraphs for further information

about these elements.

On the right-hand side of the window, on the other hand, there is a list of the courses available and the

buttons which allow the user to perform some simple operations on them, for example, copy, create and

delete. These operations are also discussed in more detail in the following paragraphs.

3.2.17.1 Selecting the courses

Select the course required by left-clicking on the relative name (search through the Tracks Present list). The

course is selected and the corresponding image is displayed automatically on the left-hand side of the

window.

Once a course has been selected, it is possible to operate on it and save any changes made, without

necessarily having to apply the course to the sessions in use.

3.2.17.2 Applying the course to the loaded sessions

After loading one or more session into the project, it may be necessary to change the track assigned by

default, in order to use a course with a different layout of the finish line and the points where split times are

measured, for example. In order to assign a new course to the session in use, it is necessary to select it from

the track list, then press Apply to apply the choice made, Once the window has been closed with the Close

button, all the open sessions will use the new course.