Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
45
3.2.17.5 Setting the split points
In order to position the lines where the split times are to be taken, select the Split headings from 1 to 4 from
the selection control available in the top left-hand corner of the Track Library Management window, then
insert the corresponding stretches as shown in the previous paragraph. In order to add the split points, it is
necessary to respect the order from 1 to 4, following the direction of travel around the track.
It is not necessary to insert all the split points.
Ensure that all the split points inserted intersect the course, otherwise the split times will not be calculated
correctly.
In order to delete a split point, select it in the control in the top left-hand corner, then press the Eraser button
(as seen for erasing the Finish Line).