Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
47
3.2.17.7 Rotating and zooming in on the selected course
In order to insert the finish line and split points precisely, position them on the course, then use the Zoom in
button to enlarge the corresponding part of the track.
It is possible to correct the position of the stretch which has just been inserted if an enlargement of the part
of the track on which the user is operating is available. Use the Zoom out button to go back to the original
dimensions.
The course rotation function allows the user to rotate the selected course by between 0 and 360 degrees in
order to aid insertion of the finish line, split points and segments.
Last of all, the left and right arrow buttons on the toolbar allow the user to select which lap of the session
used to operate on (useful when creating a new track in order to perform the operations described above on
the best acquired course).
3.2.17.8 Saving the course
When modifying the settings for a course, for example inserting segments or moving the finish line, it is
important to press the save button, in order to memorise the new settings.
Saving the new course does not imply that the new settings are used in the session in use. In order to apply
the changes to the session in use, it is, in fact, necessary to press the Apply button.
This double step allows the user to modify several courses, selecting them one at a time from the list on the
right, without having to modify the course used by the project sessions.