Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

5.2 Command area for connected devices

The command area for connected devices features are:

• Choose and download the data onto the PC

• Delete the data files from datalogger memory

• Manually start and stop of data recording (if it is set in data logger configuration)

For more informations please refer to the data logger owner’s manual.

5.2.1 Downloading recorded data (manual mode)

Please follows the instructions below (manual downloading procedure for M40 data loggers):

• Switch on the M40 (greed led on fix) and connect to the PC (both LEDs will blink together) by using the

proper USB cable.

• Wait that Windows detect the instrument (the message will be likely in the right low part of the monitor,

nearby the clock).

• Wait that instrument will be present in Devices and Sessions field and select it with a click.

• If needed, you can stop acquisition pressing Stop Acquis in the right part of Download Data page

Test