Operation Manual
DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
69
6.1 Menu bar
The menu bar contains the commands of Config Datalogger , see following chapters for more informations.
6.1.1 File menu
The commands in File menu are:
• Save : save the data logger setup file inside the PC.
• Save as : save the data logger setup file with ad different name.
• Import Sxraw: extract a setup file from an .sxraw session.
• Export Sxraw: convert a setup file (obtained by Import Sxraw function) to
a .sxraw file. In this way the user can edit the channel calibration in order
to post-calibrate the acquired datas.
• Close : stop the Config Datalogger software.
6.1.2 Menù Setup
Following are the Setup menu items:
• Send Setup to Device... : send the setup to the connected data logger.
• Send time : synchronize the data logger clock to the PC clock.
• Sync Track Library: download the track library from PC to in the data
logger.
• Create New... : create a new empty setup file for own data logger (user
can choose the proper device from a list).
•
Open From Disk... : open a setup file stored in the PC.
• Open From Device : download the data logger setup from a connected
device.
• Close Active : close the loaded and selected setup in Config Datalogger software.
• Rename: modify the name of loaded and selected setup: this feature doesn’t modify the saved setup
filename but the name displayed in Config Manager window. We suggest to keep the default names.
• Calibrate Channel : open the calibration window of selected channel.
• Copy Channel : copy the selected channel properties (calibrations, logging rate, etc.. ) to another
channel of the data logger setup (it makes fast the creations of many similar channels).
6.1.3 Watch menu
Following are the Watch menu items:
• Start/Stop Watch : run or stop the real-time monitoring when the
Watch window is a displayed.