Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena - All rights reserved
ENGLISH
78
6.5.3 Setting channel zero in “WATCH”
Zero set is useful when using some kind of sensor (for example suspension potentiometer or internal
accelerometer).
To use this function WATCH need to be activated (read chapter 6.5.1 of this Appendix) and the
sensor need to be in “zero” position.
To set the zero, press “Set Zero” of the required channel:
We suggest to send back the setup once “zero” operation are finished.
We suggest to use this function only after the channel is configured in data logger setup.