Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
79
6.5.4 Setting channel offset in “WATCH”
Sometimes it is needed to add or remove a defined value from a sensor reading (wrong “zero” of a
suspension potentiometer).
To set this we will use the Offset button:
Set the value in dialogue box:
Use positive values to subtract the offset to the channel and use negative values to add; press OK to
confirm.
6.5.5 WATCH: Quick search
The item Quick search found in the main toolbar of the Watch dialog box, allows you to do a quick search of
channels available in the lower part of the dialog box. When you enter the whole or partial name of a channel
in the appropriate field, the list below is updated showing only channels with the name included in the text
entered.
6.5.6 WATCH: Filtro sui canali
The next part of the toolbar of the Watch dialog box, allows you to filter the channels shown according to
their type.
If you click on the items Digital, Analog, System, Gaps, Can, Math, the underlying list of channels will show
only the type specified.