User manual

Mounting

Mounting should only be

done by a specialist.

The work must only be

done when the equip-

ment has been discon-

nected from the electri-

city supply; also be sure

to switch off the electri-

city supply circuit

at the fuse box.

The movement-detector

reacts to heat. In order

to avoid false switching,

do not mount the equip-

ment over radiators,

etc., or where the move-

ment-detector will be

subjected to direct sun-

light.

Firstly, separate the frame and sensor. Then screw together accor-

ding to the switch illustration shown below (figures 1-3). Insert the

supply unit into the recessed socket and tighten the fixing claws left

and right. Put the sensor unit on top and fix it by screwing to the

supply unit. The covering frame is

easily placed into

position.

Replacement of a switch Constant switching readiness:

additional switching-on by

hand is possible (hold down

the opener-pushbutton for

at least 1 sec.)

Parallel switching for existing

change-over switching

Fuse

Fixing claws

1 2 3

MA_001237_10_08 07.10.2008 14:53 Uhr Seite 13