User manual

Adjustments
2.
TIME
approximately 5 secs to 15 mins
Twilight switch (LUX)
Night operation
Day and night operation
The intermediate area can be used for various luminosity values
Coverage (METRES)
up to 8 m
The sliding switch (2) on the twilight switch
has the following functions:
0 = OFF: always set the switch to this
position when changing a light bulb
A = automatic operation: the movement-
detector switches on the light when it
detects a movement and switches it off
again after the preselected time – if no
further movement has been detected.
1 = permanent light
Now carry out a movement test by pacing
around the area of coverage, in order to
adjust the settings as desired (fig. 4).
Undesired areas can be excluded by using
the supplied masking band (3).
1
3
2
1
3
4
Set the control knob (1) for test
operation
195°
GB
MA_001237_10_08 07.10.2008 14:53 Uhr Seite 15