User manual

12 13
DEGBFRITPL
Technical data
Indoor Unit Specifications
Dimensions W 200 mm x H 145 mm x D 23 mm
Weight 0.5 Kg
Input Power DC17 V (External Power Supply)
Power Consumption Idle mode: 2 W, Operating: Max. 14 W
Connecting System 2 wires, 2 cameras, 2 monitors
Call sound Chime sound
Max. Distance & wiring Monitor to camera, 50 m: 1.0 mm
2
wire, 100 m: 1.5 mm
2
wire,
Master to slave 20 m: 1.5 mm
2
wire, Door lock to camera 20 m: 1.5 mm
2
wire
Display 7 Inch Digital wide screen LCD (LED Backlight)
Resolution 1440 H x 234 V
Operating Temperature 0 ~ 40°
Outoor Unit Specifications
Dimensions W 95 mm x H 140 mm x D 43 mm
Weight 0.5 Kg (w/rain shield)
Input Power DC12 V from monitor
Power Consumption Max. 3 W
Aspect Material Zinc alloy die casting with painting finish
Wiring Monitor: 2 wires, door lock: 2 wires
Image sensor 1/3“ Colour Sony Super HAD CCD Camera
Resolution 420 TV Lines
Video output Composite video signal 1 Vp-p at 75 Ohm terminated
Pixels 290.000 pixels
Iris Electronic auto iris
Lighting IR-LED
Viewing Angle Diagonal: 90˚ horizontal: 57.8˚ vertical: 48.6˚
Lens 3.7 mm flat pin hole lens
Door lock 2 terminals with DC power output 12 V/max. 1 A
Mounting type Surface mount
Operating Temperature -10˚C ~ 50˚C
Troubleshooting – Practical tips
Problem Possible Solution
No power (no picture on monitor) • Is the AC plug firmly inserted into the AC outlet?
Power is on, but no image on the
monitor
• Is the cable firmly connected between the monitor and the camera?
• Is the polarity of wires correct between the outdoor unit and indoor
monitor unit?
The picture is too dark or too white • Adjust brightness control
Chime sound is too low • Adjust the volume control
Outdoor unit's speaker sound level
too loud/ silent
• Fig. 3A: left knob: adjust sound level of the outdoor unit's speaker.
Sound level of the monitor's
speaker is to low
• Fig. 3B: right knob: adjust sound level of the speaker's monitor.
Technical and design features may be subject to change without notice.