Product Brochure

SPECIFICATIONS
www.GhostControls.com Contact: 850-846-6400
Rev. 0521 ARCHCUT
The Ghost Controls
®
dual swing gate operator is optimized for installation on
decorative dual gate applications up to a 24 ft. wide opening and weighing up to
1000 lbs. when proper installation has been followed. The gate operator mounting
brackets and hardware included in the kit are specifically designed for decorative
and agricultural gate types.
ARCHITECTURAL SERIES: DEP2
COMPATIBLE ACCESSORIES
 AXDP 10W or AX30W Solar Panel
 AXS1, AXP1, AXR1 Remote Controls
 AXWK Premium Wireless Keypad
 AXGN Outdoor Mounting Pedestal
 AXZL ZombieLock
®
 AXPO Push-To-Open Bracket Kit
 AXPB Push Button
 AXXV Wired Vehicle Sensor
 AXWV Wireless Vehicle Sensor
GATES
Maximum Gate Length = 20' per leaf
Minimum Gate Length = 5'
Maximum Gate Weight = 1000 lbs.
Maximum Gate Opening = 24'
KIT CONTENTS
 One (1) Gate Operator Arm with
6' cable and One (1) with 30' cable for a
24' opening.
 System Control Box with Controller
 Mounting brackets and fasteners
 Battery Box Kit with One (1) Battery
 Two (2) AXP1 Premium 5-Button Remote
Controls
 Gate Warning Placards (2)
 Installation Manual
 AC Transformer
MECHANICAL
 Opening speed: 90 degrees in approx.
15 seconds
 Opening maximum range is 110 degrees
 Pin-to-pin when arm is fully retracted 37.25"
mounting point to mounting point
 Arm maximum stroke distance: 23"
 Safety alarms for operation and diagnostics
 Control board programmable for pull-to-open
and push-to-open applications
 SafeForce
®
obstruction sensing technology
 Soft start/stop
 Auto close adjustable from 6 seconds to 1 hour
POWER
 12 VDC 7.0 amp hour, sealed, rechargeable
battery (included). We recommend two
12VDC 7.0 amp hour batteries for solar
applications, not included.
 Battery is recharged by a plug in 120VAC to
18VAC AC Transformer (included).
 10 W or 30W Solar Panel(s) (optional) and
Compatible.
 System current: 3-4 amps per leaf typical when
active. Standby is 25 mA with no accessories.
OPERATING TEMPERATURE
-5°F to 160°F
DIMENSIONS
Shipping Weight = 52.75 lbs.
Package Size = 39.5" x 6.5" x 4"
REGULATORY COMPLIANCE
Meets or exceeds UL325 7
th
Edition
2018 Standards
WARRANTY
18 Months on control and battery box and
hardware. 12 months on battery. Lifetime
Warranty on motor and gear assembly.
SPECIFICATIONS
ARCHITECTURAL SERIES
DEP2
Scan for Build a Kit
12mm Clevis
(
0.49)
10mm Clevis
(
0.44)
4-1/2"
(4.50)
Overall
62-1/8"
(62.13)
Pin-to-Pin (Extended)
60-1/4"
(60.28)
Stroke
23"
(23.00)
Pin-to-Pin (Retracted)
37-1/4"
(37.28)
5/8"
(0.63)
1-3/16"
(1.20)
Overall
39-1/8"
(39.11)
Strain Relief
Location
3-3/4"
(3.75)
2-3/4"
(2.76)