User manual

17
is any part inside the host, especially whether the hard disk and memory are
properly installed. Note: The shell of the host should be opened only with the
assistance of professionals from Giada.
5. When the system is started, it seems the set parameters of the host have
been changed. It is possible the BIOS setup made at the time the system
exited last time was not saved.
6. PC stops responding Press <Ctrl+Alt+Del> to terminate the program whose
response is stopped. If the system can’t be restored after a long time, you
should press the power switch on the host to turn off the PC, and start it. Then
check whether the newly installed hardware is compatible with your system.
7. PC runs slowly and system halted frequently. Use antivirus software to
check whether the system is infected. Check whether excessive programs are
added when the computer is being started. They may temporarily occupy too
many resources. If many programs are installed in your system and the system
has not been optimized for a long time, it will also run slowly. In this case, you
should run the optimization software programs for the disk, or run the
third-party optimization software. If the problem still exists after above
measures are taken, it is recommended that the operating system be
re-installed.
8. Abnormal display and sound. If some software or game programs can’t run
normally, you should check whether the software failure is caused by wrong
operation (including wrong installation of operating system and driver). Check
whether the version of your DirectX is conforming.