Instructions / Assembly

SM-Rib
3
Delivery, Handling and Storage
Proper care in storing and handling metal panels
is essential in providing you with years of service.
Panels should be installed immediately to prevent
storage oxidation or paint peel. Any panels not im-
mediately installed must be kept dry and stored in
an indoor area. Extreme caution should be taken in
order to prevent moisture penetration of the stack(s)
by rain, snowfall or condensation. Condensation
is moisture that accumulates naturally from the
change in temperature of the material nested in a
stack where adequate ventilation has been restrict-
ed.
Store the panels o the ground, on wooden blocks
with one end slightly elevated. Cut banding to allow
the stack to expand and allow a small amount of
ventilation. Cover the stack with loose canvas tarp or
waterproof paper. Covering should be placed over
the stack but never tightly secured to the ground to
allow air ow. Do not cover metal with plastic as this
can create condensation.
Safety Precautions
It is the responsibility of the buyer to ensure the safe
installation of these product systems. Metal panels
have sharp edges, therefore protective clothing
and gloves should be utilized. To prevent eye injury,
safety glasses must be worn when drilling or cutting
steel panels. Steel panels can become slippery when
wet. Use extreme care when walking on any roong
panel. Proper underlayment is necessary to prevent
fall-through. Plywood is recommended on all non-
structural panel applications. Do not work on steel
panels when wet or when weather conditions are
not suitable for safe installation.
Southeastern Metals recommends all installers
comply with the Florida Fall Protection Act, all OSHA
(Occupational Safety & Health Administration)
requirements (#3146, dated 1995), and any other
applicable safety rules or laws.
Cancellations
Southeastern Metals will honor cancellation prior to
manufacturing. Any order which has already been
manufactured is the property of the purchaser.
Claims
All claims of shortage, damage, etc. must be made
within 48 hours of the date of receipt. Claims must be
accompanied by a copy of the bill of lading veried by
the shipper which must indicate shortages or damages
as received. Southeastern Metals can not honor short-
age or damage claims on freight carriers unless the
carrier’s paperwork is duly noted.
Disclaimer
The information contained in this product manual is
subject to change without notice. Southeastern Metals
reserves the right to discontinue or modify products
and installation methods at any time without notice
and incurring no obligation. Contact Southeastern
Metals to obtain the latest information.
Throughout this product manual each panel series is
specied per Southeastern Metals recommended use
and application of these products. The use of these
products should not vary from these recommendations
or should not be applied using another manufacturer’s
specications or guidelines. If you have any questions
about any of the products and their appropriate appli-
cations, please call Southeastern Metals.
NOTICE: The application details are for illustration
purposes only. These details may not be suitable for
all building designs or conditions. Projects should be
engineered to conrm to building codes, regulations,
and industry practices which are applicable. Consult
Southeastern Metals for any additional information not
outlined in this manual.