Instructions / Assembly
Table Of Contents
- SM-Rib Detail Manual 08
- Table of Contents
- Fastening Schedule
- Trims and Flashings
- Fascia Cover
- Eave Drip ED-1
- Eave Flash EF-3
- Valley PV-1/PV-2
- End Wall EW-1
- Side Wall SW-1
- Transition TF-1
- Gambrel GF-1
- Gable Rake EF-1
- Gable Rake GR-2
- High Side Eave HS-2
- Hip Cap RC-2
- Hip Cap RC-6
- Ridge Cap RC-8
- Base Drip BD-1
- Double Angle DA-1
- Drip Cap DC-1
- Track Cover TC-1
- J Channel JC-6
- Outside Corner GR-2
- Inside Corner IS-1
- Venturi Vent
- Profile Vent
- Pipe Boot
- Screws
- Accessories
- Flashing Angles
SM-Rib
32
Fastener Guide
Fastener Size Finish Application
#9 - 1 1/2” Painted
Fastening galvanized
based panels or trims to
a wood substrate
#9 - 1 1/2” Mill Finish
Woodscrew
Woodscrew
Fastening galvalume
or galvanized based
panels or trims to a
wood substrate
Woodscrew
Woodscrew
#9 - 2 1/2” Painted
#9 - 2 1/2” Mill Finish
Fastening galvanized
based panels or trims to
a wood substrate
#9 - 1 1/2” Painted
#9 - 1 1/2” Mill Finish
#9 - 2 1/2” Painted
#9 - 2 1/2” Mill Finish
Fastening galvalume
or galvanized based
panels or trims to a
wood substrate
Fastening galvalume
or galvanized based
panels or trims to a
metal substrate
Metal Screw
Stitch Screw
#12 14 x 1” Painted
#12 14 x 1” Mill Finish
#12 - 3/4” Painted
#12 - 3/4” Mill Finish
Fastening trim
to panel or other
metal ashing