Instructions / Assembly

Application procedures and conditions are beyond the control of the manufacturer
and/or seller of Continuous Soffit Vent and for this reason neither manufacturer nor
seller can be responsible for the failure of the product when not used according to
instructions and specifications.
.cnI ,tneV riA 3002©30/8-41041 mroF
CONTINUOUS SOFFIT VENT INSTALLATION INSTRUCTIONS
Model SV201 & SV351
Requires two cuts in soffit for installation. Correct
location is as close as practicable to facia. For new
construction or for installation on existing structures.
MODEL SV202 & SV352
Installs next to the facia with only one cut in the soffit
required for installation. Vertical flange fits against rafter
ends (facia goes over flange), assuring that the vent will
be positioned correctly along outer edge of the soffit.
For new construction only – or remodeling involving
replacement of facia.
Continuous Soffit Vent always installs correctly, since arrangement of louvers is same from either
side. Intake airflow from each side meets above vent to create gentle turbulence assisting fallout
of snow and rain before it is carried to insulation.
Net Free
Area Per Units/
Part Model Length Lin. Ft. Ctn. Material Color
84300 SV201 MF 8´ 9 sq. in. 50 .014˝ alum. mill finish
84302 SV201 WH 8´ 9 sq. in. 50 .014˝ alum. white
84304 SV201 BR 8´ 9 sq. in. 50 .014˝ alum. brown
84306 SV202 MF 8´ 9 sq. in. 50 .014˝ alum. mill finish
84307 SV202 WH 8´ 9 sq. in. 50 .014˝ alum. white
84308 SV202 BR 8´ 9 sq. in. 50 .014˝ alum. brown
90320 SV351 WH 8´ 9 sq. in. 50 vinyl white
90325 SV351 BR 8´ 9 sq. in. 50 vinyl brown
90254 SV352 WH 8´ 9 sq. in. 50 vinyl white
SPECIFICATIONS
4117 Pinnacle Point Dr, Ste 400, Dallas, TX 75211
Customer Service: 1-800-247-8368 FAX: [phone]
[e-mail] • www.airvent.com