GV-NX68U256D-B GeForce™ 6800 Ultra Graphics Accelerator User's Manual Rev. 101 12MD-NX68U256DB-101 Copyright © 2005 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on VGA card, this may void the warranty of this VGA card.
English Table of Contents 1. Introduction ......................................................................................... 3 1.1. Features ..................................................................................................... 3 1.2. Minimum system requirement ....................................................................... 3 2. Hardware Installation ........................................................................... 4 2.1. Board layout ...............................
English 1. Introduction 1.1. Features • • • • • • • Powered by NVIDIA® GeForce ™ 6800 Ultra Graphics Processing Unit (GPU) Supports the newest PCI Express x 16 Integrated with 256MB DDR III memory Supports DirectX 9.0 Supports NVIDIA® SLITM (Scalable Link Interface) technology note Supports TV-Out connector Supports 2 DVI-I connectors 1.2.
English 2. Hardware Installation 2.1.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON THE CARD. In order to ensure your graphics card working correctly, please use official Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem on the graphics card. -5- Hardware Installation English Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1.
English 2.2. Hardware installation Installing Your graphics card. Now that you have prepared your computer, you are ready to install your graphics accelerator card. To install your graphics accelerator card: 1. Power off the computer and monitor, then disconnect the display cable from the back of your computer. 2. Remove the computer cover. If necessary, consult your computer's manual for help in removing the cover. 3. Remove any existing graphics card from your computer.
English 5. Replace the screw to fasten the card in place, and replace the computer cover. After installing the GV-NX68U256D-B to your computer, please remember to connect at lease one power cable on the graphics card to the power supply connector. We suggest you to connect both of the two power cables on the graphics card to the power supply to achieve optimcal graphics performance. 6. Plug the display cable into your graphics card; then turn on the computer and monitor.
English How NVIDIA ® SLITM (Scalable Link Interface) technology works: In an SLI configuration, two SLI-ready graphics cards with the same model and from the same manufacturers are connected together via SLI bridge connector in a system that provides two x 16 PCI Express slots to scale graphics performance. The picture below shows that two graphics cards are linked in parallel in an SLI configuration. Two SLI-ready graphics cards of the same type.
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 2000 or Windows® XP to achieve better 3D performance. 0 Note: For software MPEG support in Windows® 2000 or Windows® XP, you must install DirectX first. Step 1. When autorun window show up, click Install DirectX 9 item. Click "Install DirectX 9" item. Step 2. Choose I accept the agreement and Click "Next" button. Step 3. Click "Next" button. -9- Software Installation English 3.1.2.
English Installing the components. Step 4. Click "Finish" to restart computer. Then the DirectX 9 installation is completed.
A. New hardware found After the graphics card is inserted into your computer at the first time, the windows will automatically detect a new hardware in the system and pop out a "New Hardware Found" message. The following is the step-by-step installation guide. Step 1: Found new hardware wizard: Video controller (VGA Compatible) Click "Next" button to install the driver. (There is a driver CD disk that came with your graphics accelerator, please insert it now.
English B. Driver installation (Autorun Window) Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window. If it does not show up, please run "D:\setup.exe". Step 1. When autorun window show up, click Install Display Driver item. Click "Install Display Driver" item. Step 2. Click "Next" button. Windows installings the components. Step 3. Click "Finish" button to restart computer. Then the driver installation is completed.
Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window. If it does not show up, please run "D:\setup.exe". • Install V-Tuner 2: Step 1.Click "Utilities" item. Step 2.Click "GIGABYTE Utility" item. Step 3. Click "Next" button. Step 4. Enter your name and company. Step 5. Click "Finish" button to restart computer. Then the utilities installation is completed. - 13 - Software Installation English 3.1.4.
English V-Tuner 2 V-Tuner 2 lets you adjust the working frequency of the graphic engine and video memory (Core Clock and Memory Clock). Displays core clock status Displays memory clock status Adjust Memory speed Adjust Core speed Enables auto adjustment of core/ memory clock settings set by user when running 3D applications.
After installation of the display drivers, you will find a GIGABYTE icon on the taskbar's status area. Right-clicking this icon opens the GIGABYTE control panel, showing a menu composed of shortcut of the graphics card's enhanced and other functions. You may click the "Display Properties" item, and then click Settings. Click "Advanced" after clicking Settings. Click the appropriate tab to change your display settings. Right click the icon.
English VGA Information VGA Info lists the relevant information about your card. Color Adjust Color Adjust allows you to make color adjustments, such as brightness, contrast and gamma values for each or all of RGB colors.
on the taskbar's Right click the icon. You can adjust the properties of the graphics accelerator from here. - 17 - Software Installation English After installation of the display drivers, you will find a NVIDIA icon status area. Click this icon to open the control panel.
English 3.1.6. Display Properties pages To access Display Properties pages, right-click the GBT icon on the taskbar and select Display Properties or right-click on Desktop and then select Properties. The Display Properties dialog box shows the information of display adapter, color, the range of display area, and the refresh rate. Settings (Resolutions and Color depth for Windows) You may adjust the screen resolution and color quality settings in this dialog box.
nView allows you to connect separate displays to single graphics card. • nView modes: select your preferred nView display modes here. Options: Single display/ Clone/ Horizontal span/ Vertical span/ Dualview • Display pair: select a single display or display pair. The selected display combination will appear in the graphical representation below. If TV is chosen as the display, you will need to select the proper TV format. To do this, click "Device Setting" followed by "Select TV format".
English Color Correction properties The Color Correction Properties is used to compensate for variations in luminance between a source image and its output on a display device. Adjust the color correction settings to provide more accurate color reproduction of images(such as photographs) on your display device. Also, many 3Daccelerated games may appear too dark to play. Increasing the brightness and/or the gamma value equally across all channels makes these games appear brighter and more playable.
The NV Rotate Properties is used to rotate the screen. If your monitor is capable of operating in either Landscape or Portrait mode, you can adjust the screen by this properties. • Landscape (0 degree rotation) • Portrait (90 degree rotation) • Inverted Landscape (180 degree rotation) • Inverted Portrait (270 degree rotation) Temperature Settings properties The Temperature Properties can auto detected the GPU Core temperature andAmbient temperature.
English Menu Editing properties The Menu Editing Properties can remove infrequently used screens by dragging them from the screen menu to the list below. Restore screens to the menu by dragging them individually, or click Restore Defaults. To begin, check the Enable screen menu editing check box. To return to normal navigation mode, uncheck the check box. 3.1.7. nView properties pages nView is a set of desktop tools designed to help you be more productive when using your graphics card.
Click the item to start nView Properties. Double-click Desktop Management to see more nView properties. nView Desktop Management properties This tab contains information about the nView Desktop Manager. The setup wizard can also be accessed from this tab. nView Profile properties This tab contains a record all nView display settings for easy software setup.
English nView Windows properties This tab allows you to control of window and dialog box placement when using multiple monitors. nView Applications properties This tab allows you to control nView settings depending on different applications. nView Desktops properties This tab allows you to create up to 32 unique desktops.
This tab allows customization of the nView user interface. nView Effects properties This tab provides special windows effects that you can apply to your applications. nView Zoom properties This tab provides dynamic zoom functionality on the desktop. Also enables full screen video playback via the video mirroring control button.
English nView Hot Keys properties This tab lets you perform various actions with shortcut keys or key combinations. nView Mouse properties This tab can modify and extend mouse behavior with kinematic actions. nView Tools properties This tab can improve nView functionality for mobile and desktop users.
With Windows running on your computer, you need to install the graphics card driver to take advantage of the higher performance, resolutions, and special graphics features of the graphics card. To ensure you install the latest driver, insert the Installation CD that shipped with your graphics card. To install the graphics card driver for Win® 2000, please insert the Installation CD. Then the AUTORUN window will show up. Click Install Display Driver item, and follow the wizard to install the driver.
English 4. Troubleshooting Tips The following troubleshooting tips may help if you experience problems. Contact your dealer or GBT for more advanced troubleshooting information. Check that the card is seated properly in the PCI Express x 16 slot. Ensure that the display cable is securely fastened to the card's display connector. Make sure that the monitor and computer are plugged in and receiving power. If necessary, disable any built-in graphics capabilities on your motherboard.
English 5. Appendix 5.1. How to Reflash the BIOS 5.1.1. Reflash BIOS in MS-DOS mode 1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A. 2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart the computer in MS-DOS mode.) 3. Change the command prompt to A:\>. 4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name] -s [BIOS file name] (example: gvf11 -s nx66t128d.f1) and press Enter. 5.
English 5.2.