Operation Manual

12
First steps
Gigaset R410H PRO / IM1 eng / A31008-M2154-R901-1-7619 / starting.fm / 21.08.2012
Version 4.1, 21.11.2007
Display in idle status
Once the phone is registered and the time set, the idle display is shown as in this
example.
If Eco Mode + (
¢ page 25) is not activated, the top left of the display shows the
strength of the radio contact between the base station and the handset:
u Good to poor: Ð iÑÒ
u No reception: | flashes
Your phone is now ready for use!
Connecting the headset
After removing the rubber cover, you can
connect a headset to the underside of your
telephone with the 2.5 mm jack connector.
See the relevant product page at
www.gigaset.com
for information on
recommended headsets.
After using the headset, always replace the
rubber cover.
Displays
¼ Eco Mode + activated (¢ page 25)
½ Eco Mode activated (¢ page 25)
Charge status of the batteries:
= e V U (flat to full)
= flashes: batteries almost flat
INT 1 Internal name of the handset
¼½V
INT 1
01.10.09 07:15
INT SMS
www.InternetVoipPhone.co.uk | [e-mail] | 0800 088 48 46