Operation Manual
7
First steps
Gigaset R410H PRO / IM1 eng / A31008-M2154-R901-1-7619 / starting.fm / 21.08.2012
Version 4.1, 21.11.2007
Setting up the handset for use
The display and control key are protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Only use the rechargeable batteries (¢ page 33) recommended by Gigaset
Communications GmbH. Never use conventional (non-rechargeable) batteries,
as this could result in significant health risks and damage to property. For exam-
ple, the outer casing of the batteries could be destroyed or the batteries could
explode. The phone could also malfunction or be damaged as a result of using
batteries that are not of the recommended type.
¤ Insert the batteries the right way round.
The polarity is indicated in/on the bat-
tery compartment.
¤ Hold the battery cover at a slight
angle and push it onto the casing,
bottom first a.
¤ Then press the cover b until it
clicks into place.
a
b
¤ Insert the lock ring or belt clip into
the battery cover as illustrated
(rotated by approx. 20°). In the
case of the lock ring, pay attention
to the arrow markings.
¤ Turn the lock ring or belt clip
clockwise to the end stop.
When the markings on the ring
and cover are aligned, the lock
ring is closed.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46