User manual

12
Web configurator – configuring the phone on a PC
Maxwell 10 / en / A31008-N4001-R102-1-20 / web_configurator.fm / 22.01.2014
Template A4, Version 1, 03.04.2012
Web configurator – configuring the phone on a PC
The Web configurator provides you with a user interface that you can use to configure your
Maxwell
10 on the PC.
Prerequisites:
u Your phone is connected to the local network ( p. 9).
u The Web server is enabled on the phone.
Enabling the web server
¤ On the Start screen tap on to open the list of available apps. Select Settings.
Starting the Web configurator
To start the Web configurator you will need the IP address for your phone. You will find this via the
phone display, in the Ethernet or WLAN settings for the device:
When connected via Ethernet:
¤ On the Start screen tap on Select Settings Ethernet Ethernet Configuration.
When connected via WLAN:
¤ On the Start screen tap on Select Settings Wi-Fi Tap on the network your
phone is connected to.
Accessing the Web configurator:
¤ Launch the Internet browser on your PC.
¤ Enter the IP address in the browser's address field. Example:
The login screen appears.
¤ Select the appropriate language from the drop-down list.
¤ Enter the password. Default: admin
¤ Click on Login.
The Web configurator will now start.
¤ Select the function that you wish to use.
u Use the Settings tab to set or change individual functions on your phone.
u Open the Status tab to obtain information about the status of your phone ( p. 39).
¤ Select Web Server Drag switch by Web Server to the
right to switch on the Web server function.
u The IP addresses are also displayed on the status page:
¤ Settings About tablet Status.
u The IP address can sometimes change, depending on the settings of the DHCP
server in your network.
For your security, you should change the default passwords ( p. 36).
Web Server
ON