User manual

ManualsBrandsGIGASET PRO ManualsPhone accessoriesTelephone wall mount Maxwell Grey 1 pc(s)

Function keys

Maxwell 10 / en / A31008-N4001-R102-1-20 / web_configurator.fm / 22.01.2014

Template A4, Version 1, 03.04.2012

Park + Orbit

This function key is used to "park" a call. The participant hears the hold music. This function key

allows you to transfer calls within a group, which share a common line. It will be configured on all

extensions for the group. The "Park + Orbit" keys on all extensions flash if a call has been "parked"

on an extension. The call can be picked up on any extension by pressing the key.

This function is only available if your telephone is connected to a Gigaset phone system and the

number has been assigned to a group. The function key can also be assigned using the phone sys

tem.

¤ Select the required connection and enter the Phone number of the shared line.

¤ Enter a name for the key.

Speed Dial

Assigns the speed dial for a phone number to the function key.

¤ Select the required connection and enter the Phone number that should be selected using

this function key.

¤ Enter a name for the key.

BLF

A function key that is configured as BLF (Busy Lamp Field) indicates the status of a shared line. It

will be configured on all extensions for the group. The keys will flash on all extensions if a call

comes in and light up if the line on any extension is busy.

You can accept an incoming call if you have set the Directed call pickup code.

This function is only available if your telephone is connected to a Gigaset phone system and the

number has been assigned to a group. The function key can also be assigned using the phone sys

tem.

¤ Enter the Phone number for the shared line.

¤ If you wish you accept calls with the key, enter the Directed call pickup code. For a Gigaset

phone system this code is *8.

¤ Enter a name for the key.

Call Divert

Assigns a call divert to the function key.

¤ Select the connection for which the call divert should apply and enter the Phone number to

which the calls should be diverted.

The call divert set up here applies to all calls. To configure different call divert rules, use the screen

Settings

¢ Telephony ¢ Call Divert ( p. 26).

¤ Enter a name for the key.

DTMF

Assigns a number to the function key that is dialled using DTMF. This is required, for example, for

querying and controlling certain network mailboxes via digit codes or for remote operation of the

local answering machine.

¤ Enter the Phone number that should be dialled using DTMF signalling.

¤ Enter a name for the key.

None

Nothing assigned.

¤ Click on Save to accept the key assignment.

You will now be returned to the Function Keys screen, where you can programme more keys.

Saving settings

¤ Click on Save to save the settings on this screen.