Operation Manual

Lombok A130/AL130A/A230/AL230A / Großbritannien / A31008-M2412-L101-1-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
10
The following keys are used for operation:
Activating the answer machine
~ (Enter your own number and allow the phone to ring until you hear the message:
"Please enter PIN")
¤ ~
(Enter system PIN)
Your answer machine is activated. It tells you how much memory time is left. The mes-
sages are now played back. The answer machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answer machine in your provider's telephone network.
More information is available from your provider. You cannot use the network mailbox
unless you have
requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list
(¢ page 8), the menu (¢ page 16) and to use fast access via key 1 (¢ page 1), you
will need to enter the number in your phone:
MENU ¤ u Answer Machine ¤ OK ¤ u Netw. Mailbox/Net Mailbox ¤ ~ (enter
number)
¤ OK
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key on the base (¢ page 1)(¢ page 2).
All handsets will ring at the same time (“paging”), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base
(¢ page 1)(¢ page 2) or press the talk key b or the end call key a on the handset.
A
During the number/date/time announcement: Skip to the start of the previ-
ous message.
During the message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
Registering handsets manually
You can register up to four handsets to your base station. Each additional handset
must be registered on the base station in order for it to work properly!
Registration takes approx. 1 minute. Handsets are assigned the lowest available inter-
nal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the
number
4 will be overwritten.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset
handsets.
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u De-register HS ¤ OK ¤ u
Select the internal party you wish to de-register. The handset you are currently using
is indicated by <.
¤ OK ¤ Enter the base system PIN (default setting: 0000) ¤ OK
Using multiple handsets
Making internal calls
Internal calls are free calls to other handsets that are registered to the same base sta-
tion.
2 handsets are registered
Press the display key INT, the other handset is called.
More than 2 handsets are registered
Calling a specific handset
INT ¤
~
(1...4, enter internal number of the handset) or
INT ¤
u
(Select the internal party) ¤ OK or b ¤ the handset is called
Calling all handsets (“group call”)
INT ¤ P or INT ¤ u Call all ¤ OK or b ¤ all handsets are called
When a participant answers you can speak to them. To end the call, press a.
1) On the handset
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Register HS ¤ Enter the
base system PIN (default setting: 0000)
¤ OK ¤ Registering is displayed.
2) On the base
Within 60 seconds, press and hold the registration/paging key on the base
(¢ page 1)(¢ page 2) for approx. 3 seconds.