Operation Manual

Lombok A130/AL130A/A230/AL230A / Großbritannien / A31008-M2412-L101-1-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
11
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the INT display key and call
one or all handsets. The external participant hears the hold music. When the internal
participant answers: If necessary, announce the external call.
Either press the end call key a (the call is transferred to the internal participant), or
press the display key ”. You are reconnected with the external participant.
When transferring a call you can also press the end call key a before the internal par-
ticipant answers.
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and
take part in the conversation (conference).
Prerequisite: The Listening in function
must be activated.
Activating/deactivating listening in
MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Listening in ¤ OK (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the b key. You can lis-
ten in to the call. All participants hear a signal tone.
To end: press the end call key a. All participants hear a signal tone.
If the first internal participant presses the end call key a, the handset that has “lis-
tened in” remains connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
MENU ¤ u Alarm Clock ¤ OK ¤ Activation ¤ OK (‰ = on)
When activated: ¤ ~ (Set the wake-up time) ¤ OK
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock
is set, the wake-up icon
l will appear on the screen and the wake-up time will be dis-
played instead of the date.
Setting the wake-up time
MENU ¤ u Alarm Clock ¤ OK ¤ u Wake-up time ¤ OK
Enter the wake-up time in hours and minutes, then press OK.
Phone settings
For details on how to make audio settings, see menu overview ¢ page 16.
For details on how to set the system PIN on the base station, see the menu overview
¢ page 16.
Changing the display language
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Language ¤ OK ¤ u
(select language) ¤ OK
The current language is indicated by ‰.
If you accidentally choose a language you do not understand:
MENU ¤
521
(press the keys one after the other) ¤ u (select language) ¤ OK
Activating/deactivating music on hold
You can select that your external participant hears music in case of internal recall and
during call transfer.
MENU ¤
P#Q5#1M
¤ The number for the current setting flashes:
0 = off; 1 = on ¤ enter number ¤ OK.
Repeater mode
With a repeater you can increase the range of your base station. You will need to acti-
vate repeater mode (¢ page 16). Repeater mode and No Radiation mode
(¢ page 16) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the direc-
tory, the calls list and the handset's registration to the base station will be retained.
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Reset Handset ¤ OK
¤ Reset? ¤ OK
Cancel the reset with a.
Resetting the base station
When restoring factory settings the No Radiation mode is deactivated, individual set-
tings are reset and all lists are deleted.
The date and time are retained. The answer machine (AL130A/AL230A only) is ready
for use approx. 15 seconds after the base has been reset.