Operation Manual

20
Gigaset A540-A540A / en / A31008-M2601-L101-2-7619 / extending.fm / 28.10.2014
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Expanding the functionality of the telephone
Expanding the functionality of the telephone
Multiple handsets
Upgrade the telephone to a cordless PABX.
Information regarding additional handsets can be found at www.gigaset.com.
Compatibility
The main functions of device combinations between base and different handsets are available at:
www.gigaset.com/compatibility
Registering
A total of up to four handsets can be registered to the base.
On the base: ¤ Hold down (min. 3 seconds) the registration/paging key
(
¢ page 1) . . .
and on the A540 handset: ¤ Menu ¤ q Settings ¤ OK ¤ q Registration ¤ OK ¤ Register
Handset
¤ OK ¤ . . . enter system PIN if necessary (default setting:
0000)
¤ OK
The connection to the base is established; this may take some time.
De-registering
¤ Menu ¤ q Settings ¤ OK ¤ q Registration ¤ OK ¤ q De-register Handset ¤ OK . . . the handset
used is selected
¤ . . . select another handset if necessary with q ¤ OK ¤ . . . if necessary enter the
system PIN (default setting: 0000)
¤ OK ¤ (μ Saved)
Locating a handset ("Paging")
¤ Briefly press the registration/paging key on the base (¢ page 1) . . . all handsets ring at the same time
("paging"), even if the ringtone is deactivated
Ending the search
On the base: ¤ Press the registration/paging key again briefly
or on the handset: ¤ Press the Talk key c or End call key a
h
Handset registration must be initiated on the base and on the handset.
Both must be carried out within 60 secs.
i
The handsets are automatically assigned names "INT 1", " INT 2" etc. Each handset will automatically
be assigned the lowest unassigned number (1-4). Successful registration is shown on the display.
If four handsets are already registered to the base (all internal numbers assigned), the handset with
the internal number 4 will be replaced with the new one. If this is not possible, because a
conversation is being held on this handset for example, the message No free Internal Number is
given. In this case, another handset that is no longer required should be de-registered and the
registration process should be repeated.
•For other Gigaset handsets and handsets with GAP functionality: register the handset in accord-
ance with the relevant user guide.
i
After approx. 3 minutes, the paging call will end automatically.