Operation Manual

31
Gigaset A540-A540A / en / A31008-M2601-L101-2-7619 / appendix.fm / 28.10.2014
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Manufacturer's advice
Technical data
Batteries
Technology: 2 x AAA NiMH
Voltage: 1.2 V
Capacity: 400 mAh
Handset operating times/charging times
The operating time of the telephone depends on the capacity of the battery, its age and the way it is used.
(All
times are maximum possible times).
Base power consumption
General specifications
Standby time (hours) * 200 * / 110 **
Talktime (hours) 18
Operating time for 1.5 hours of calls per day (hours) * 90 * / 65 **
Charging time in base (hours) 4
Charging time in charging cradle (hours) 4
* No Radiation deactivated, without display backlight in idle status
** No Radiation activated, without display backlight in idle status
A540 A540A
In standby mode
• Handset in charging cradle
• Handset outside charging cradle
approx. 0.6 W
approx. 0.55 W
approx. 0.7 W
approx. 0.65 W
During a call approx. 0.65 W approx. 0.75 W
DECT standard Supported
GAP standard Supported
No. of channels 60 duplex channels
Radio frequency range 1880-1900 MHz
Duplex method Time division multiplexing, 10 ms frame length
Repetition frequency of the transmission pulse 100 Hz
Duration of the transmission pulse 370 μs
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW average power per channel, 250 mW pulse power
Range Up to 50 m indoors, up to 300 m outdoors
Base power supply 230 V ~/50 Hz
Environmental conditions for operation +5°C to +45°C, 20% to 75% relative humidity
Dialling mode DTMF (tone dialling)/PD (pulse dialling)