User Guide

16
Taking the first steps
Gigaset C300-C300A / USA-CAN EN / A31008-M2203-R301-2-3S19 / starting.fm / 11.07.2011
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Depending on your network provider, the date and time may be displayed
automatically.
Enter Date:
[04.04.2010]
¤ Press the key below §Time§ on the display
screen to open the input field.
(If you have already set the time and
date, open the input field using the
menu ¢ page 26.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the month, day and year as an
8-digit number using the keypad,
e.g., Q4Q42QQ
for 4 April 2010.
INT 1
Redial Time
To change the input position,
e.g., to correct an entry, press
right or left on the control key.
¤ Enter the hours and minutes in
4-digit format using the keypad,
e.g., QM5for 07:15 am.
Change the input position with
the control key if necessary.
If necessary, press the AM/PM display key
to change the time setting from AM to
PM.
¤ Confirm with
§OK§.
x
Back OK
¤ Press the key below §OK§ on the display
screen to save your entry.
Enter time:
[07.15 am]
x
AM/PM OK