User Guide

33
Using the directory and lists
Gigaset C300-C300A / USA-CAN EN / A31008-M2203-R301-2-3S19 / direct_charges.fm / 11.07.2011
Version 4, 16.09.2005
Disable/enable flashing of the
message key
You can select whether the message key f
flashes (default setting) or does not flash
when new messages arrive. Please do the
following:
¤
Press the key sequence:
v
¤
*#Q5#M
The following is displayed:
¤ Press one of the following keys to select
the message type:
Your selection is displayed (e.g. 5 for
missed calls); the current setting flashes:
¤ Press key Q or , to set the behavior
for new messages:
Your selection is displayed (e.g. 1):
¤ Press the display key
§OK§.
Answering machine list
(Gigaset C300A only)
You can use the answering machine list to
listen to the messages that are on the
answering machine.
Call list
Prerequisite: Caller ID Presentation (CID,
page 27)
The call list contains the last 30 numbers,
depending on the type of list set
u All calls
–Accepted calls
– Unanswered calls
– Calls recorded by the answering
machine (Gigaset C300A only)
u Missed calls
– Unanswered calls and
– Calls not recorded by the answering
machine (Gigaset C300A only)
In idle status, you can open the call list by
pressing the message key f.
Setting the call list type
§Menu§ ¤ Settings ¤ Telephony
¤ Calls List Type
Missed Calls / All Calls
Select and press
§OK§ (³=on).
a Press and hold (idle status).
The call list entries are retained when you
change the list type.
5 for missed calls
or M for messages on the answer-
ing machine (Gigaset C300A
only)/network mailbox
Q message key flashes (it stops
when the key is pressed)
or  message key does not flash
97
975 SET: [0]
975 SET: [1]