User Guide
Table Of Contents
- Gigaset C300/C300A - your high-quality accessory
- Overview
- Understanding the display icons
- Using the display keys
- Main menu icons
- Base overview
- Contents
- Taking the first steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Directory
- Saving the first number in the directory
- Saving a number in the directory
- Order of directory entries
- Selecting a directory entry
- Selecting from the directory
- Managing directory entries
- Using shortcut keys
- Transferring the directory to another handset
- Copying the displayed number to the directory
- Copying numbers from the directory
- Using the redial list
- Message key function
- Answering machine list (Gigaset C300A only)
- Call list
- Directory
- Operating the Gigaset C300A base answering machine
- Using the network mailbox
- ECO DECT
- Using the handset as an alarm clock
- Using multiple handsets
- Handset settings
- Base station settings
- Connecting the base to the PBX
- Troubleshooting
- Protecting our environment
- Appendix
- FCC / ACTA Information
- Service (Customer Care)
- Accessories
- Mounting the base on the wall
- Mounting the charger on the wall
- Index
42
Using multiple handsets
Gigaset C300-C300A / USA-CAN EN / A31008-M2203-R301-2-3S19 / registr_sett.fm / 11.07.2011
Version 4, 16.09.2005
Using multiple handsets
Registering handsets
You can register up to four handsets on your
base station. Each additional handset must
be registered with the base in order for it to
work properly!
Registering the Gigaset handset
with the Gigaset C300/C300A
You must manually register the handset on
both the handset (1) and the base (2).
Once the registration process has been com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display, e.g., INT 1. If not, repeat
the procedure.
Registering other handsets
You can manually register other Gigaset
handsets and handsets for other devices
with GAP functionality as follows.
Deregistering handsets
You can deregister all other registered hand-
sets from each of the registered Gigaset
handsets.
§Menu§ ¤ Settings ¤ Registration
¤ De-register Handset
s Select the internal subscriber
you wish to deregister and
press
§OK§.
(The handset you are currently
using is highlighted with <).
~ Enter the current system PIN
and press
§OK§.
§OK§ Press the display key.
Locating a handset (paging)
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 5).
¤ All handsets will ring simultaneously
(paging), even if the ringtones are deacti-
vated.
Ending paging
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
§Menu§ ¤ Settings ¤ Registration
¤ Select Base
s Select one of the bases or Best
Base and press
§OK§.
1) On the handset
§Menu§ ¤ Settings ¤ Registration
¤ Register Handset
If the handset is already registered to four
bases:
s Select base, e.g., Base 3 and
press
§OK§.
~ If required, enter the system
PIN for the base and press
§OK§.
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the
registration/paging key on the base
(¢ page 5) (approx. 3 seconds).
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/paging
key on the base (¢ page 5) (approx.
3 sec.).