Operation Manual

10
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Gigaset GS270 / LUG International en / A31008-N1503-R101-1-7619 / starting.fm / 9/11/17
Charging the battery
¤ Plug the Micro-USB connector of the charger cable
provided into the Micro-USB socket of the smartphone
¤ Connect the power adapter to the USB connector of the
charger cable and connect it to the power source.
The Message LED lights red during the charging process (
p. 3). The device is charged once th
e Message LED lights green
and the charge icon in the Status bar is filled completely.
Switching on the device
¤ Keep the On/Off button pressed until the device vibrates.
When you are requested to unlock the SIM card,
¤ use the keypad to enter the PIN of the SIM card
When switching on the device for the first ti
me, a wizard starts which guides you through the
initial configuration.
Wizard for configuring the device
When you switch on your phone for the first time, you are automatically guided through the
most important configuration steps.
Selecting the language
The set language is displayed.
¤ Select another language as required tap
Inserting SIM cards
This screen is only shown when no SIM card is inserted:
¤ Insert card now ( p. 9)
Insert SIM card later: Skip
Establishing a WLAN connection
Wireless networks (WLANs) in range are displayed.
¤ Tap the required WLAN Enter the WLAN password Connect . . . A connection to the
selected WLAN is established
So your phone does not discharge during set-up, keeping it connected to the power
is recommended until set-up is complete.
< Back: Check and change as required settings already configured.
Next > Apply the setting on the screen and jump to the next screen.
Skip Configure the setting later.