Operation Manual

30
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Additional functions
Gigaset GS270 / LUG International en / A31008-N1503-R101-1-7619 / operating.fm / 9/11/17
Disabling “Do not disturb”
¤ From the Status bar, swipe down using two fingers . . . The quick settings are displayed Tap
the or icon . . . All signals are turned on again and the icon is displayed
or
¤ Press the Quiet button on the right of the device Tap End now Set the volume as
required
Disabling “Do not disturb” for certain apps
¤ Settings Device – Notifications . . . All apps are displayed Select the app
Enable the switch next to Ov
erride Do Not Disturb . . . Notifications for this app are
permitted in mode Priority only
Specifying important interruptions
Specify events which are to be signalled acoustically in the Priority only mode.
¤ From the Status bar, swipe down . . . . . . The quick settings are displayed Tap Do not
disturb More settings Priority only allows Enabl
e/disable events for Alarms,
Reminders, Even
ts and Repeat callers with the switch
Messages and calls are not signalled acoustically by default (setting None). T
o change the
setting:
¤ Tap Messages / Calls Select the required option (From anyone, From contacts only,
From starred contacts only)
Selected contacts are denoted as favourites in the contact list ( p. 40).
Additional functions
Setting up multiple users
You can enable the device for more users. All users receive a separate area they can set up
themselves, such as own start screen, apps, accounts and contacts. Different user icon colours
denote different users.
Setting up users
¤ Settings Device – Personal . . . All available users are displayed Add user
OK
or from the quick settings:
¤ Swipe down the toolbar using two fingers Tap . . . All available users are displayed
Add user OK
T
he Setup Wizard is opened.
¤ Configure user-specific settings with the Wizard ( p. 10).