Operation Manual

53
Gigaset GS270 / LUG International en / A31008-N1503-R101-1-7619 / settings.fm / 9/11/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Security
Colour inversion
Swapping of colour values. For example, black text on a white screen becomes white text on
a black screen.
Colour correction
Compensate the effects of colour blindness.
More information on accessibility features is available from: Google Help
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time aft
er the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
Setting up a display lock
Settings Users – Security Screen lock Enter the PIN, pattern or password if
you have already specified a lock Select the method . . .
Pa
ttern, PIN, Pa
ssword
¤ Select option Require pattern to start device if the requirement is for the device to prompt
unlocking at the start Continue
For Pattern:
¤ Draw the pattern - join together at least four dots Continue Repeat the pattern
Confirm
For PIN:
¤ Enter at least four letters or digits Continue Repeat the PIN OK
For Password:
¤ Enter at least four letters or digits Continue Repeat the password OK
Settings for the display lock
¤ Settings Personal – Security Tap next to Screen lock Make the setting
It is also possible to use a fingerprint as a display lock ( p. 27). In this case, the
display lock set up serves as the alternative method.
Setting up a display lock when getting started ( p. 12).
None . . . No security
Swipe . . . The display can be unlocked by swiping over the screen