Operation Manual

Operation

Volume

Parent Unit

You can adjust the volume at which you hear your baby by using the keys  and  on the

parent unit.

Press Volume keys or will increase or decrease the speaker output. Totally

10Levels (VOL 01 to VOL 10, VOL 01 = MUTE). User could adjust the received baby voice.

• 1 beep tone for each volume key pressing

• 3 beep tone as warning of volume limit (max / min). The LCD will display [VOL MAX] or

[VOLMIN] for 3sec and then exit to Top Level Display Mode

• Beep tone is constant and not volume control

• Every time user press Volume keys or , the LCD displays the volume setting for

example “VOL 05”. If user no any key command for 3sec, the LCD will clear the volume

setting display and exit to Top Level Display Mode

• Volume keys or can only be working as volume control in Top Level Display.

Volume adjustment can only be allowed in Top Level Display Mode. Because these 2 keys

will use as up/down in menu level

• It has last memory function after power o

Baby Unit

Using the Volume keys

or on the baby unit you can adjust the volume for your voice

(when speaking from the parent unit) and the lullabies (only for the internal source). If a MP3

player is connected to the baby unit, the volume is adjusted by the MP3 player volume keys.

Press Volume keys or will increase or decrease the speaker output. Totally

10Levels (VOL 01 to VOL 10, VOL01=very small volume for lullaby play, VOL 01= MUTE for

when baby receive voice from parent). User could adjust the lullaby output or received talk

back from parent voice level.

• No tone for each volume key pressing

• 1 beep tone as warning of volume limit (max / min)

• Beep tone is constant and not volume control

• Internal Lullaby is with volume control

• External MP3 Player Audio In is constant and no volume control

• It has last memory function after power o

ECO MODE

When the Parent comes close to the baby unit, the transmission power will be dynamically

reduced to save the power