Operation Manual

26
Operation
Battery charge indicator and battery low warning
The parent unit will work up to 8 hours without charging, but this depends on the amount of
activity and the level of the charge in the batteries. On the display you can see the charging
status:
Battery icon full = full capacity
Battery icon 1/2 full = approx.half capacity
Battery icon empty / battery symbol ashes = batteries must be charged
Parent Unit
• When battery is low, the power LED becomes Red. Low Battery Icon is turned on. Battery
low beep tone alarm will be generated.
• The parent unit switches o after at least 15 minutes from alarm starts
• During battery charging, the power LED is ashing Red. Low Battery – Mid Battery – Full
Battery Icons are continuous ashing one by one to indicate the charging is in progress.
…
… … … … … … … … …
• When battery is high or charging is completed. Full Battery Icon will be turned on without
ashing.
• When battery is not installed, battery icon will NOT turn on and the power LED will NOT
turn Red.
Baby Unit
• When battery is low, the power LED becomes Red
• When battery is not installed, the power LED will NOT turn Red
Baby unit to parent unit paging
Useful if one parent is in the baby’s room and needs to contact the other. Also helps to nd a
mislaid parent unit.
At the baby unit
Press and hold the Paging key
briey. The parent unit will emit a tone. The tone can be
switched o by pressing any key on the parent unit or by pressing the Paging key on the
baby unit once again.
Paging function have the Time-out after 2 minutes.
Display of the temperature and humidity in the baby’s room
Press and hold down the OK/Menu key for approx. 2 seconds.
The temperature and humidity in the baby’s room will be displayed. The information will be
updated once in a minute.
Press and hold down the OK/Menu key for approx. 2seconds to return to the date/time
display.
en