A270 - User Guide

10
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Gigaset A170-A170A / A270-A270A / LUG GR-IE-MEA-UK-International en / A31008-M2802-B101-1-4N19 / starting.fm / 9/8/
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries
Charging the batteries
¤ Charge the batteries fully prior to first use in the base or
the charging cradle.
The batteries are fully charged when the battery icon on
the display stops flashing.
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤ MENU Press the keys slowly in succession . . . the language set
(e. g. English) is displayed
¤ To select a different language: Press the control key until the language required is
selected on the display, e. g. Francais OK ( = selected)
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤ Insert the batteries with
the polarity in the correct
direction.
The polarity is indicated in
the battery compartment.
¤ Insert the battery cover
from the top.
¤ Then slide the cover
upwards until it clicks
into place.
To open the battery cover, for
instance to replace the batter-
ies:
¤ Reach into the notch
at the top of the cover
and slide the cover
down-wards.
Batteries may heat up during charging. This is not dangerous.
After a time, the charging capacity of the batteries will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. If,
however, a handset has not been registered (Register HS or Put into base is displayed),
please register it manually ( p. 23).
6.5
h