A270 - User Guide
Table Of Contents
- Contents
- Overview of the handset
- Overview of the A170A/A270A base
- Illustration in the user guide
- Getting started
- Operating the handset
- Making calls
- Directory
- Message/call lists
- Local answer machine (A170A/A270A only)
- Network mailbox
- Using handsets
- Additional functions
- Telephone settings
- Customer Service & Assistance
- Manufacturer's advice
- Technical details
- Index
11
Gigaset A170-A170A / A270-A270A / LUG GR-IE-MEA-UK-International en / A31008-M2802-B101-1-4N19 / starting.fm / 9/8/
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Setting time and date
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
¤ MENU Settings OK Date/Time OK Enter the date in 8 digits (day, month
and year) OK Enter the time in 4 digits (hours and minutes) OK (Display: Saved)
Moving the input position to the left or the right:
Press up or down on the control key
Copying the date and time
If your telephone is sent the date and time in a caller display (for example by your network
operator, a router or a PABX) you can specify whether and when this data should be copied.
¤ Press the keys: MENU
. . . You will see the following displayed; the current setting flashes, e.g.
¤ Press the key to determine when the data is copied:
never or
once, if the date and time are not set in your telephone or
always
. . . You will see your selection (e.g. 2 f
or 'always'):
¤ Press the display key OK.
973 SET: [0]
973 SET: [2]