A270 - User Guide

24
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Using handsets
Gigaset A170-A170A / A270-A270A / LUG GR-IE-MEA-UK-International en / A31008-M2802-B101-1-4N19 / telephony.fm / 9/
Registering through a menu (on A170A/A270A only)
On the handset
¤ MENU Settings OK Handset OK Register HS Enter the system
PIN for the base (default setting: 0000) OK The display shows Registering.
On the base
¤ Within 60 seconds after entering the system PIN press and hold the Registration/paging key
( p. 5) (at least 3 seconds).
De-registering the handset
You can de-register any other registered handset from any registered Gigaset handset.
¤ MENU Settings OK Handset OK De-register HS OK Select
the internal participant to be de-registered.
The handset you are operating is marked with < OK Enter the system PIN for the base
(default setting: 0000) OK . . . Put into base flashes in the display, the handset has been
de-registered
Making internal calls
Making internal calls
Calling a specific internal participant:
¤ INT if more than two handsets are registered: use to select an internal participant or
use to enter the internal number of a handset
¤ OK or . . . The handset selected is called
Calling all handsets ("group call"):
¤ INT
or
¤ INT Call all
¤ OK or . . . All registered handsets are called. You speak to the first internal participant
to pick up.
Registration must be initiated both on the base and on the handset. Both must be
carried out within 60 seconds.
The registration process takes approximately 1 minute. The handsets are assigned the
lowest free internal number (1-4). If the numbers 1-4 have already been allocated to
other devices, number 4 is overwritten.
Internal calls are cost-free calls to other handsets registered to the same base.