Installation & Assembly

DESCRIPTION QTY.

DOME TENT

100% Polyester 1

POLES

Fiberglass Pole; Dome 2

STAKES

Metal 4

CARRY POUCH

100% Polyester 1

Owner’s Manual

MODEL # CT008/ Large Explorer Dome

Dimensions: 6’ x 5’ x 42”

Step 1- TENT SET UP

1) Spread the tent body out on the ground.

2) Fully open both of the poles.

3) Carefully thread each pole through the pole sleeves located on top of tent (Figure A).

4) Starting with one pole, insert the pole end into the footing located at bottom corner of tent. Be sure to insert pole end into the opening

closest to tent (Figure B). Bend pole and insert other end into the diagonally opposite corner of tent. Repeat process for other pole. Your

tent should now be erect.

5) Tie the straps onto the poles atop of tent (Figure C).

6) Stake the tent down (Figure D).

Step 2- ATTACHING THE RAIN FLY

1) Drape fly over tent

2) Hook corners of fly to nylon straps on pole sleeves (Figure E).

ASSEMBLY INSTRUCTIONS

PAGE 1
Owner’s Manual MODEL # CT008/ Large Explorer Dome Dimensions: 6’ x 5’ x 42” DESCRIPTION QTY. DOME TENT 100% Polyester 1 POLES Fiberglass Pole; Dome 2 STAKES Metal 4 CARRY POUCH 100% Polyester 1 ASSEMBLY INSTRUCTIONS Step 1- TENT SET UP 1) 2) 3) 4) Spread the tent body out on the ground. Fully open both of the poles. Carefully thread each pole through the pole sleeves located on top of tent (Figure A). Starting with one pole, insert the pole end into the footing located at bottom corner of tent.
PAGE 2
Manufacturer’s Warranty Warranty covers product to be free from defects in material and workmanship for 14 days after date of purchase. Warranty does not cover natural breakdown of materials that occur inevitably with extended use (e.g., UV damage, exhausted zippers, defects caused by accident, abuse, alteration, animal attack, storm damage, misuse or improper care. This product is covered for 14 days from date of purchase. Please check all contents to verify product has no missing or broken parts.