Owner manual

7
2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the back of the Dash Cam. Push the memory
card until it clicks into place. (Use class 6 or above the micro SD cards for this Dash Cam; It is
recommended to format the micro SD cards before the initial use.)
To remove the memory card
Push the ed ge of the memory card inward until you hear/feel it click, then allow it to push out until you can
remove it from the slot.
Note:
1. Do not remove or insert the memory card when the device is powered on. This may damage the
memory card.
2. It is recommended to use a 16 or 32 GB, Class 6 speed or above micro SD card.
3. It is recommended to format the micro SD cards before the initial use.