User Manual

If the Br-SDC8 is also in a binary mode, then both the commands to embed the

markers into the strings to send a binary, Hexadecimal or BCD values and the com-

mands to select the multiplexed serial port have been added to the menu:

On the String Setup menu, there are ﬁfteen strings, numbered 1 through 9 and A

through F. Each string can hold up to one hundred characters (you will need to expand

your screen view beyond eighty columns or scroll to the right to see strings longer than

twelve characters). Characters are entered into the strings directly as HEXadecimal val-

ues using the ʻvalue to sendʼ and ʻvalue to getʼ commands. Any value between 00h to

FFh can be sent or received. As an example:

To send a letter “a“, you enter the HEXadecimal value of 61h.

Values can also be entered as ascii characters by using the ʻTx Textʼ and ʻRx Textʼ

commands. This allows you to just ʻtypeʼ whatever characters need to go into your

string. Characters entered as ascii text will appear on the screen between single quotes.

Values to ʻgetʼ are also surrounded by parenthesis.

a) LaserDisk/DVD Player type:

This command is used to select which type of LaserDisk/DVD is going to be used

with the Br-SDC. Supported types are Pioneer or Sony. For each of these, you can also

a) Pioneer CAV, b) 9600 baud, c) clear, d) save, e) shows, f) 30 FPS, 9) mode

h) edit string F, i) edit entry__1, s) Tx value, g) Rx value, u) Rx any, k) kopy

j) Tx Text, q) Rx text, l) dvd search, m) dvd End, T) start Timer, x) string end

n) 8 bit binary, o) two character HEX, p) three character BCD, 0-8) Select Mux.

|__1__|__2__|__3__|__4__|__5__|__6__|__7__|__8__|__9__|__10_|__11_|__12_

string1 |serch|_'P'_|_'L'_|_0Dh_|('R')|(0Dh)|LdEnd|_'S'_|_'T'_|_0Dh_|('R')|(0Dh)

string2 |serch|_'P'_|_'L'_|_0Dh_|('R')|(0Dh)|LdEnd|_end_|

string3 |_'S'_|_'T'_|_0Dh_|('R')|(0Dh)|_end_|

string4 |

string5 |

string6 |

string7 |

string8 |

string9 |

stringA |

stringB |

stringC |

stringD |

stringE |

STRINGF |

Enter Command-

Gilderﬂuke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485

Br-SDC Manual / December 30, 2013 9:24 AM / page 35 of 62