User Manual

can be triggered by the optically isolated inputs as with mode 2, but the multi-
plexed serial ports to use for the strings can be selected either using the ʻAT+++ʼ
commands of mode 0, or the commands embedded in the strings that are to sent
from the internal memory of the Br-SDC8. The Br-SDC8 does not hear any of the
data returned through the multiplexed serial ports, as these are passed through to
the Br-SDC8ʼs ʻConfig./Mux. RS-232 portʼ (female DE-09) or ʻMux./RS-422ʼ (fe-
male Rj-12) ports. All of the commands to ʻRxʼ a character are not displayed if in
mode 1. As with mode 2, mode 1 has the option of a ʻbinary modeʼ as described
above for the Br-SDC/09 and Br-SDC/422.
3) Mode 2: This mode is the closest in operation to the single port Br-SDC/09 and
Br-SDC/422 as described above. The only addition to the menus you will see is
the addition of the commands to select the multiplexed serial port on the string
menu:
As with mode 2, mode 1 has the option of a ʻbinary modeʼ as described for the
Br-SDC/09 and Br-SDC/422. This will add the commands to set ʻbinary, hex or
BCD values to be embedded in the strings:
- Gilderfluke & Co. - Br-SDC8 Multiport Serial Controller - v2.13 (c) 2014 DCM -
a) Pioneer CAV, b) 9600 baud, c) clear, d) save, e) shows, f) 30 FPS, 9) mode
h) edit string F, i) edit entry__1, s) Tx value, g) Rx value, u) Rx any, k) kopy
j) Tx Text, q) Rx text, l) dvd search, m) dvd End, T) start Timer, x) string end
0) Rx from one and Tx to all, 1-8) Select serial port for both Rx and Tx
|__1__|__2__|__3__|__4__|__5__|__6__|__7__|__8__|__9__|__10_|__11_|__12_
string1 |serch|_'P'_|_'L'_|_0Dh_|('R')|(0Dh)|LdEnd|_'S'_|_'T'_|_0Dh_|('R')|(0Dh)
string2 |serch|_'P'_|_'L'_|_0Dh_|('R')|(0Dh)|LdEnd|_end_|
string3 |_'S'_|_'T'_|_0Dh_|('R')|(0Dh)|_end_|
string4 |
string5 |
string6 |
string7 |
string8 |
string9 |
stringA |
stringB |
stringC |
stringD |
stringE |
STRINGF |
Enter Command-
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-SDC Manual / December 30, 2013 9:24 AM / page 43 of 62