User Manual

String
Entry
Multiplexer
Selected
Mux4
Mux5
Mux6
Mux7
Mux8
Tx = #4, Rx = #4
Tx = #5, Rx = #5
Tx = #6, Rx = #6
Tx = #7, Rx = #7
Tx = #8, Rx = #8
Note that when using the embedded ʻMuxʼ commands, it is not possible to transmit
through more than one multiplexer output at one time, unless you want to transmit to all
of them simultaneously (Mux0).
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax [phone]
Br-SDC Manual / December 30, 2013 9:24 AM / page 49 of 62