Operation Manual

10
Replacing inscription label
Inscription labels
For labelling the Gira Door Station Stainless Steel, use only Gira inscription labels.
The transparent plastic labels are non-fading, weather-resistant and wrinkle-free.
With the included release code, inscription labels for the first labelling are available free
at www.marking.gira.com
1. Unlock the call button with the enclosed plastic key:
twist the plastic key anti-clockwise until it engages.
2. Engage the call button:
press the call button firmly inwards by approx. 1 cm.
✓ The call button engages and stays in the pressed
position.
3. Grip under the glass cover with the flat side of the
plastic key and twist out the inscription label carrier.
4. Remove the existing inscription label and slide the
new inscription label into the inscription label carrier
until it stops.
120°
c
l
i
c
k
c
l
i
c
k
1 cm
Do not remove the inscription label carrier.
Do not lift and remove the inscription label carrier!
M
u
s
t
e
r
m
a
n
n