Operation Manual

12
Opening Door Station Stainless Steel
The included opening tool is required for opening the
Door Station Stainless Steel.
1. Turn the (lower) fastening bolt(s) with the opening
tool to "Open".
Single-column door stations have one lower fasten-
ing bolt, double-column door stations have two
lower fastening bolts.
The position of the fastening bolts is shown via
small recesses on the lower side of the front panel.
2. Lift the front panel from the lower attachment (1.)
and pull it at an angle downwards from the upper
attachment retainers (2.).
90°
Open
90°
Open
90°
Open
Take care with plastered walls
With repeated opening of the door station with
plastered walls, the opening tool may damage the
plaster.
2.
1.