Operation Manual

6
Installing panel box
1. Select a suitable installation site and chisel an
opening in the wall.
2. If necessary, mount the included wall anchor.
Note the following information when mounting the
panel box:
• Ensure installation position is correct. (note the "TOP"
labelling).
• The panel box must be installed level. With the later
mounting of the Door Station Stainless Steel there is
no possibility for correction.
• The panel box must be installed as flush to the sur-
face as possible!
It must be ensured that the locking plate can be flush-
mounted later. Maximum plaster compensation is
20 mm.
3. Plaster in the panel box to be flush with the final
surface (maximum plaster compensation 20 mm).
Attention
Installation and mounting of electrical devices may
only be carried out by a qualified electrician.
max.
20 mm