Operation Manual

Starting up

Once all of the devices (door and home stations, control device etc.) have been installed,

the door communication system can be started up.

Start-up a door station is described in the system manual included with the control device.

Multi-function input

A mechanical push button can be connected to the

multi-function input of the stainless steel door

station's built-in loudspeaker via the included connec-

tion cable.

The push button then has the same function as a call but-

ton and can therefore be used, for example, as a call but-

ton or for controlling a switching actuator.

5. Pull the front panel from the mounting retainers (1.)

and fold these in (2.).

6. Position the (lower) fastening bolt(s) of the front

panel to "Close".

7. Mount the front panel onto the guide bolts and

press it on until the upper and lower fastening bolts

engage.

Open