Instructions / Assembly

Two function pressure balance concealed faucet
1 Installation Precautions、
When facing the front of the faucet, the hot water supply is on the left
and cold water supply is on the right. Incorrect connection will cause
permanent damage to the cartridge.
If the accessories to be changed without affecting the use, we will not
make a prior notice.
The water pressure of the faucet is 0.05MPa-1.0MPa (including cold
water and hot water pressure).
Applicable water temperature range: 39℉ - 194℉
Please read the installation manual carefully before installation.
3.
5.
1.
The impurities in the water supply pipe must be cleared before
installation to avoid blockage.
4.
2 Preparation before installation、
Installation work must be performed by a professional installer.
2.
Installation tool：
3.
3 Two function concealed faucet accessories list、
10
1
9
diverter handle
1
8
1
7
cover board
1
6
1
2
4 Technical drawing of product、
Unit: inch
3
4
Allen key
Protective cover
5
on/off handle
3
1
2
1
1
control valve
1
Quantity
Number
Description
5
1
4
1
1
1
1
11
12
13
Screw set
5 Technical drawing of drilling size、
1、The size of the embedded box that needs to be drilled
is 5.3"*6.7".
2、The depth of the embedded box is 1.8"-2.2".
It's better to drill the depth of 1.8"for bla
nk wall.
Hot water
6 Pipe connection、
Please drill the holes on the wall for the main body embedded part,
hot and cold water inlet pipes as well as shower arm connection
pipes according to the basic product dimension dr
awing as below.
Please make hot and cold water inlet pipe, the mixed water outlet
pipe connect with control valve,and tighten with the wrench
1
、
2
、
cold water
6
8
7
9
11
12
13
10
5. 3 "
6 . 7 "
2 . 8 "
2 . 6 8 "
Handle shower
Shower hose
Shower head
Shower arm
Cover board
Elbow with hook
13.8"
1/2-14NPT
2-1/2-14NPT
2-1/2-14NPT
78"~88"
36"~40"
47"~63"
"
5.2"
1.8"~2.4"
1/2-14NPT
1
2
3
4
5
Top shower
outlet water
Handle shower
outlet water
wall
Tile surface
2.2"
1.8" 2"-
7.5"
6"
2.68"
1
Installation Manual
connected.
1
.
When you open the product packaging, please check the product
and
accessories at first. If there is any discrepancy, please contact us.
2.
cThe
hot and cold water supply pipe of the faucet must be properly