Installation Guide

5
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
NOTE: For removal, see”Quick Connector Removal.”
Inserting the hose Tightening the base
Remove the quick connector (G) from the hose (E).
Insert the hose (E) through the small hole of the
base (K).
Remove the base insert (J) from the base (K).
4 3
NOTE: Ensure the flexible hoses do not twist when inserting
them through the small and large holes in the base (K).
Inserting the supply lines and
outlet hose
Insert the supply lines (I) one by
one through the large hole of the
base (K).
Insert the outlet hose (H)
through the large hole of the
base (K).
5
Use one hand to hold the base (K) and the second
hand to tighten the two screws with the allen
wrench (L) until the locking nuts secure the base
(K) on the sink. Make sure the “FRONT” mark
on the base (K) faces the front of the sink while
tightening the screws.
K
J
K
L
K
E
G
E
K
H
K
I
I
Large hole
Small hole
Large hole