Model# HD67737-3001 HD67737-3008D2 SKU# 1005657446 1005657524 INSTALLATION AND CARE GUIDE MCKENNA SINGLE-HANDLE PULL-OUT SPRAYER KITCHEN FAUCET With Deck Plate Without Deck Plate Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................2 Planning Installation ..............................2 Tools and Hardware Required ...............2 Package Contents ..................................3 Installation ................................................4 Operation...................................................7 Care and Cleaning ......................
Pre-Installation (continued) PACKAGE CONTENTS A D E B F G C Part A Description Quantity Faucet assembly 1 B FastMount™ 1 C Quick connector 1 D Escutcheon 1 E Gasket 1 F Weight 1 G Weight clip 1 3 HOMEDEPOT.COM/GLACIERBAY Please contact 1-855-HD-GLACIER for further assistance.
Installation 1 Installing the faucet assembly CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □ Shut off the water supply. Remove the old faucet. Clean the mounting surface. 1a 1b NOTE: This step is for escutcheon installation (optional). NOTE: This step is for no escutcheon installation (optional).
Installation (continued) the quick connector 2 Securing the faucet assembly 3 Attaching to the receiving block □ NOTE: Make sure that the face marked with the arrow on the flange (1) is facing forward. □ From underneath the sink, secure the faucet assembly to the sink with the FastMount™ system (B). Push the FastMount™ system (B) up over the threads until it stops against the bottom of the sink, then hand turn (clockwise) to tighten (Fig 1).
Installation (continued) 4 Installing the weight □ Install the weight clip (G) at the point of the hose marking “weight here”. □ Insert the weight (F) onto the clip (G) by sliding it down onto the clip (G). the water supply 5 Making connections NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging. □ Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with a wrench.
Operation 1 Flushing and checking for leaks IMPORTANT: After installation is completed, turn on the hot and cold water supplies. Check for leaks. □ Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet to the warm position where it mixes hot and cold water. □ Flush the water lines for one minute.
Care and Cleaning □ To clean, wipe down with a damp cloth and dry with a towel. □ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will be voided. Troubleshooting NOTE: Refer to the service parts section in this manual for a detailed drawing showing the location of the parts listed below. Problem Possible Cause Solution There are leaks underneath the handle. The bonnet nut has come loose and the o-ring on the cartridge is dirty or damaged.
Service Parts 2 3 4 5 1 6 7 8 10 11 12 9 13 Faucet ID tags can be found on the hot water inlet 14 15 Part Description Part Number Part Description Part Number 1 Spray head and Hose RP38514* 9 FastMount™ RP56096 2 Handle assembly RP13799* 10 Block RP70421 3 Screw RP50200 11 O-ring RP60002 4 Cap RP80783* 5 Cartridge RP20130 12 Quick connect assembly RP70697 6 Bonnet nut RP70782 13 O-ring RP60089 7 Escutcheon RP80782* 14 Weight RP70689 8 Gasket RP80744 15
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Modelo núm. HD67737-3001 HD67737-3008D2 SKU núm. 1005657446 1005657524 GUÍA DE USO Y MANTENIMIENTO MCKENNA-MEZCLADORA PARA COCINA, CON UN SOLO MANERAL Y ROCIADOR EXTRAÍBLE Con placa de cubierta Sin placa de cubierta ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Tabla de contenido Información importante .........................12 Garantía...................................................12 Pre-instalación .......................................12 Planificación de la instalación .............12 Herramientas y herrajes necesarios ....12 Contenido del paquete .........................13 Instalación ..............................................14 Funcionamiento ......................................17 Cuidado y limpieza ................................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE A D E B F G C Pieza Descripción Cantidad A Ensamblaje del grifo 1 B FastMount™ 1 C Conector rápido 1 D Placa protectora 1 E Junta 1 F Peso 1 G Sujetador con peso 1 13 HOMEDEPOT.COM/GLACIERBAY Para obtener asistencia, llama al 1-855-HD-GLACIER.
Instalación 1 Cómo instalar el ensamblaje del grifo PRECAUCIÓN: Cierra siempre el suministro de agua antes de retirar un grifo existente o reemplazar alguna parte del mismo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. □ Cierra el suministro de agua. Retira el grifo anterior. Limpia la superficie de montaje. 1a 1b NOTA: Este paso es para la instalación de la placa protectora (opcional).
Instalación (continuación) fijar el ensamblaje del montar el conector 2 Cómo 3 Cómo grifo rápido al bloque receptor □ NOTA: Asegurar que la cara marcada con la flecha en la brida (1) quede mirando hacia delante. □ Desde abajo del lavamanos, asegura el conjunto del grifo a aquel con la sistema FastMount™ (B). Empuja la sistema FastMount™ (B) hacia arriba sobre las roscas hasta que toque la parte inferior del lavamanos. Enseguida gírala con la mano (hacia la derecha) para ajustar (Fig. 1).
Instalación (continuación) 4 Instalar el peso □ Instala el sujetador de el peso (G) en la punta de la manguera marcada “weight here” (peso aquí). □ Inserta el peso (F) en el sujetador (G) deslizándola en el sujetador (G). hacer las conexiones 5 Cómo del suministro de agua NOTA: El tubo de entrada del agua caliente se identifica con una etiqueta. Evita enroscar los cables juntos o colocarlos cerca y evita dañarlos.
Funcionamiento 1 Cómo purgar las tuberías y comprobar que no haya fugas IMPORTANTE: Luego de terminar la instalación, abre los suministros de agua caliente y fría. Revisa si hay filtraciones. □ Retira del caño el ensamblaje de la manguera y retira el cabezal del rociador desenroscándolo de la manguera en el sentido contrario a las manecillas del reloj.
Cuidado y limpieza □ Para limpiar, usa un paño húmedo y seca con una toalla. □ No uses limpiadores abrasivos, esponjas de alambre o productos químicos fuertes para limpiar esta mezcladora, pues ello anulará la garantía. Solución de problemas NOTA: Consulta la sección de piezas de repuesto de este manual para ver un dibujo detallado que muestra la ubicación de las piezas enumeradas a continuación. Problema Posible causa Hay filtraciones debajo de la manija.
Piezas de repuesto 2 3 4 5 1 6 7 8 10 11 12 9 Pieza Descripción 13 Las etiquetas de identificación de la mezcladora pueden encontrarse en la entrada de agua caliente.
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserva este manual para uso futuro.