Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
Installation
1
Removing the old toilet
2
Installing the floor bolts
□ Turn off the water supply and flush the tank completely.
Towel or sponge remaining water from the tank and bowl.
□ Disconnect and remove the old water supply line.
□ Remove the bowl from the floor by removing the bolt caps
and the floor bolt nuts.
□ Remove the floor bolts from the toilet flange and clean old
wax, putty, and sealant from the base area.
□ Temporarily plug the floor flange with a towel or cover t
o
block sewer gases
from escaping.
NOTE: The mounting surface must be clean and level
before the new toilet is installed.
□ Insert the floor bolts (AA) into the slots on the toilet flange
(1) with the bolt heads down and threaded ends facing up.
The heads of the fl
o
or bolts (AA) should be perpendicular to
the slot opening in the toilet flange.
□ Ensure the floor bolts (AA) are parallel to the wall. W
hen
set, hand-tighten the hex nuts (BB) onto the floor bolts (AA)
to
secure.